Roofing Products

Browse by Material

• Concrete Tile, the most common roof in the Phoenix metro
• Clay Tile, longer color retention at a higher cost
• Asphalt Shingles, the lowest entry cost and the shortest desert service life
• Spray Polyurethane Foam, the Southwest low-slope standard
• Roof Coating Systems, renewal rather than replacement
• Underlayment & Ventilation, the parts nobody sees and everybody should ask about
• Synthetic & Composite, engineered polymer at a fraction of tile weight
• Metal Roofing
• Commercial Roof Systems

Browse by Manufacturer

See preferred roofing brands for what each manufacturer is known for and how their products behave in desert conditions.

What Roofing Costs in Phoenix, Honestly

You will find per-square-foot figures published across this market, and they are worth treating with care. A range wide enough to be accurate is too wide to plan against, and a narrow one is guessing at your roof.

What is genuinely true is the ordering. From lowest installed cost to highest, roughly: asphalt shingle, then coating renewal on an existing low-slope roof, then spray foam, then concrete tile, then clay tile. Metal spans a wide band depending on the panel system. A tile lift-and-relay sits well below full tile replacement, which is why it is worth asking about before accepting a replacement quote.

What moves your number within any of those: roof area and pitch, complexity, the existing system and how many layers come off, deck condition, access and staging, product tier, and whether existing tile is reused rather than bought new.

We will give you a real figure after seeing the roof, at no cost, with the scope written out so you can compare it against anyone else's. What we will not do is publish a number that sounds precise and is not.

The Four Questions That Actually Decide It

Material comparison charts tend to obscure the decision rather than clarify it. In practice four things determine what goes on your roof.

What does your structure carry? Tile is heavy. A house framed for shingles cannot simply take tile without a structural review, and going the other direction is fine but changes the appearance permanently. This constrains the option set before preference enters.

What is the slope? Tile and shingles need pitch to shed water. Low-slope areas need foam, coating or membrane regardless of what the main roof is. Most Phoenix-area homes have both, which is why most homes end up with two materials.

What will the association allow? In a managed community, profile and color are frequently prescribed. Establish that before you get attached to something.

How long do you intend to own it? A material with a longer service life is only better value if you are there for it. Someone selling in three years and someone staying thirty are making different decisions with the same information.

How Materials Compare on the Things That Matter

Rather than a spec table, here is what actually separates them in this market.

Up-front cost, lowest to highest: asphalt shingle, then coatings on an existing low-slope roof, then foam, then concrete tile, then clay tile. Metal varies widely by system.

Service life of the visible material: tile is by a distance the longest, followed by metal, then foam and coatings with periodic renewal, then shingle. This is the figure marketing leads with, and on tile it is misleading unless you also ask about underlayment.

Maintenance obligation: foam and coatings require periodic recoating and are the wrong choice for an owner who will not commit to it. Tile needs occasional attention and one large underlayment event. Shingle needs little until it needs replacing.

Repairability: shingle is easy while flexible and difficult once brittle. Tile is straightforward if the profile is available and awkward if discontinued. Foam repairs readily with compatible material. This gets almost no attention at purchase and matters for decades afterward.

Most Arizona Homes Need Two Materials

A steep tile or shingle field over the main structure and a low-slope section over a patio, casita or garage is the standard Phoenix-area arrangement. Those are two systems with two service lives and two maintenance schedules.

A proposal covering only the main roof is not covering your property. When comparing quotes, check which roof areas each includes before comparing the numbers.

What We Will Not Tell You

There is no best roofing material for Arizona, and any contractor who names one without seeing your building is selling rather than advising.

We also will not quote energy savings for any product. Reflectance and emittance are real, measurable properties and we will give you a product's rated figures. What that means for your cooling bill depends on insulation, duct condition, air sealing and HVAC efficiency at least as much as on the roof, and a percentage presented without a building-specific basis is marketing.

Availability

Elite Roofing has confirmed it installs every material described in this section. Anything outside that can usually be sourced, with lead time. We tell you which category a product falls into before you choose it, because a special-order profile changes your schedule.

Ask what the underlayment spec is before you compare tile prices. Or call (480) 565-7663.